Top 23 best trailer spindles

If you are here to explore every possible detail to find out the best trailer spindles, you won’t be disappointed.

According to our research team reports, we found some best trailer spindles for truck bed. Here we are making a short list to easy pick. You can make any items from here without hesitate. Let’s see in below all the reported products and choose which is suitable for you.

best trailer spindles- [Top Picks]

Sale
SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 4-4" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Sale
[2-Pack] Spindle #84 E-Z Lube Weld-On with Brake Flange for 3500 lbs Trailer Axle - Compatible with Bearings Kit L44649/10 & L68149/11
  • ✔️ [Part Number] - SP131 Trailer Axle Spindle
  • ✔️ [Stub Diameter] - 1-3/4 inches
  • ✔️ [Overall Spindle Length] - 8-1/4 inches
  • ✔️ [Fitment] - 3,500 lbs Trailer Axle Bearing E-Z Lube #84
  • ✔️ [Quantity in Package] - 2 Pack of Spindle #84
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 4-4" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Sale
Southwest Wheel R30484X 84 Spindle &5-4.5" Bolt Circle Trailer Hub
  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub
  • 84 Spindle
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs
RIGID HITCH INCORPORATED Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2) Square Stock 1 Inch Straight Spindles & Bearings
  • Pair of 1" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44643 1" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
Sale
SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Sale
Southwest Wheel R204BT8X BT8 Spindle & 4-4" Bolt Circle Trailer Hub
  • Round R204BT8X BT8 Spindle & 4-4" Bolt Circle Trailer Hub.
  • BT8 Spindle 1" diameter
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts
  • BT8 Spindle, Spindle base size=1 1/2" Spindle length=3 3/8" Overall length =8 1/4" Capacity (pair) 1,000 lbs
Southwest Wheel R30484X 84 Spindle & 5-5.5" Bolt Circle Trailer Hub
  • Round R30484X 84 Spindle & 5-5.5" Bolt Circle Trailer Hub
  • 5 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub
  • 84 Spindle
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs
Southwest Wheel R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • 42 Spindle
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
Southwest Wheel R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub
  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub
  • 84 Spindle
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs
RIGID HITCH INCORPORATED Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKRD-2200545) Includes (2) 1-1/16 Inch Straight Spindles & Bearings
  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44649 1-1/16" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a ROUND 1-1/4" stock diameter with a bearing surface of 1-1/16 inch.
Southwest Wheel R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub
  • Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub.
  • 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub.
  • 42 Spindle
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs.
Sale
The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap; comes as shown in the first image
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles"
RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings
  • Pair of 1" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44643 1" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
Sale
The ROP Shop (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap; comes as shown in the first image
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles"
RIGID HITCH INCORPORATED Trailer Hub Kit (BT-100-F) 4 Bolt on 4 Inch Circle - Fits 1" and 1-1/16" Spindle
  • Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
  • Fits both 1" and 1-1/16" diameter straight spindles
  • Hub measures 4-1/4 inches tall (through center of hub)
  • 2,000 lb capacity - 1/2-20 thread - 4 bolt on 4 inch bolt circle
RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKRD-200044) Includes (2) 1 Inch Straight Spindles & Bearings
  • Pair of 1" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44643 1" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a ROUND 1-1/4" stock diameter with a bearing surface of 1 inch.
SOUTHWEST WHEEL 5-Hole, 4.5" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1" Spindle
  • 5 studs 4.5" bolt circle using L44643 inner and outer bearings.
  • Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts.
  • Fits a BT8 Spindle (1" OD) - Will not work on 1 1/16" spindle or some marine trailer axles.
  • TruRyde hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
RIGID HITCH INCORPORATED Trailer Hub Kit (BT-150-F) 5 Bolt on 4-1/2 Inch Circle - Fits 1" and 1-1/16" Spindle
  • Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
  • Fits both 1" and 1-1/16" diameter straight spindles
  • Hub measures 4-1/4 inches tall (through center of hub)
  • 2,000 lbs capacity - 1/2-20 thread - 5 bolt on 4-1/2 inch bolt circle
RIGID HITCH INCORPORATED Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-2200545) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings
  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins.
  • Bearings included - (4) L-44649 1-1/16" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub)
  • Spindles feature a 1-1/2" SQUARE stock diameter with a bearing surface of 1-1/16 inch.
ANPART Trailer Hub Kit for 2000 lbs axle Trailer Axle Hub Wheel Bearing Kits 1 1/16 - L44649 Spindle -4 to 4 Bolt Idler Hub & 1 Round BT8 Spindle
  • Compatibility : Fits 2000 lb. Axles, Works on Dexter and other brands 2000lbs axle in the market
  • High Load Capacity and Accuracy: Has super load capacity and provides precise guidance for wheel rotation
  • High-performance Seal: Has good heat r-esistance, mud and sewage r-esistance, so it is suitable for a variety of complex and harsh environments
  • Spray Paint Protection Layer: Our Trailer Hub are uniformly surface-painted, which can greatly reduce or avoid oxidative c-orrosion on the wheel surface, and can maintain a beautiful appearance for a long time
  • Before You Buy: Please make sure the hub assembly matches your model. There are no installation instructions for this product, you can search for installation videos directly on YouTube.
1750# EZ Lube 2" Round #84 Spindle for 3500# Axle fits Dexter ALKO Axis Trailer
  • 1750# EZ Lube 2" Round #84 Spindle for 3500# Axle fits Dexter ALKO Axis Trailer By LIBONSTORE
  • Manufacturer Part Number: SP-20084FZ-KIT Part Type: Brakes & Components

Conclusion for trailer spindles

See, that wasn’t hard, was it? Sure, there are quite a few options to choose from. But if you read that correctly, you will see there are quite a few high-end and some budget stuff present here as well. How much are you willing to spend for your desired trailer spindles?

Leave a Comment